If you use solar panels as a means of energy, you should be regulating the current charge in accordance with the battery voltage, and this 12/24V 30A solar controller, with LED indicator lights, is just the device for the job.
Benefits: - Maintains full voltage in battery
- Prevents battery from over-charging
- Prevents battery from over-discharging
- Prevents battery from supplying electricity to solar panels at night
- Reverse polarity protection for battery
- Reverse polarity protection for solar panel
- Auto locking self-protection mode when current exceeds rate of controller
- Auto locking self-protection mode when short circuit occurs
- Controller will auto-separate loads from system in the event of battery low voltage
- Protection against lightning strikes
- Automatic Temperature Compensation
- LCD screen displays charge current, discharge current and battery voltage every 5 seconds
- Continuous count of charge and discharge current battery hours
- Auto set-up of charge-on/off and load-on/off voltage depending on voltage level of the battery
- Manual set-up of charge-on/off and load-on/off voltage option
The solar controller is brand new and boxed and comes with instructions and connector jack. Specifications: - Rated voltage: 12V, 24V [automatically distinguished voltage]
- Loading current max: 30A - 45A
- Full charge cut: 13.7V; X 2/24V
- Low voltage cut: 10.5V; X 2/24V
- Reconnected voltage: 12.6V; X 2/24V
- Temperature compensation: -3mv/cell, ˚C recognise and reset
- No load loss: ≤45mA
- Wire area minimum: 6mm²
- Voltage drop: <270mv
- Dimensions: 16 x 14.5 x 5.7cm [6 x 5.8 x 2.2 ”]
- Weight: 570g
- Colour: black
V1.1 M.S.
